How to Install a Baby Gate on an Angle
Obviously, you have to start thinking about installing safety gates before your little one starts to crawl. You can expect this to happen when a baby is anywhere between 6 and 11 months.
When to install baby gates?
A good time to start planning where and how you are going to install baby gates is at least a month earlier. Please consider that many parents encounter most difficulties trying to baby-proof the stairs of their house.
Where to put baby gates?
Not sure where to install baby gates in your home? Start by making a checklist of dangerous areas in your home.
- The entrance of the kitchen
- At the top/bottom of the stairs
- To patio or balcony
- Around wood stove or fireplace
- Nursery doorway
- On the porch
In some places, consider installing a good child-proof door lock instead of a gate, like on a door to the patio or basement. This may keep the cost down when you try to babyproof the entire house.
Smart Tip
Follow the manufacturer's guidelines when installing a gate. Avoid working from your own knowledge or doing things without reading the instructions.
The difference between hardware and pressure mounted gates
Hardware-mounted gates – These require that you drill in a door frame, wall, or banister to secure the gate. They are, without a doubt, the most secure way of installing a gate. When installing the gate, you have to make sure you are drilling on a surface that will hold the gate.
Pressure-mounted gate – These are easy to install baby gates. They stay securely in place through the pressure they put on two surfaces on either side. Pressure-mounted gates are a lot easier to install than hardware-mounted gates because you don't need tools or carpentry skills. A word of warning, these gates are not suitable for angled situations and on top of a staircase.
How to install baby gates without drilling
Most parents prefer a baby gate installed without drilling in a wall and without drilling in a banister. In many cases, you can get this done with an installation kit.
How to install a baby gate on a square and round post?
1. EZ Fit II Safety Gate Adapter
If you need to install a baby gate on a round post, the EZ Fit II Safety Gate Adapter may help you do this. It is designed for taller baby gate installations and bigger banister posts up to 18″ around. It is a no-drill solution for people that do not want to damage the banister of their staircase.
What's great about this product:
- You use the adapter pretty nearly with any baby gate.
- You can install both pressure mounted and hardware mounted baby gates without drilling in the banister.
- The only kit that will fit banisters up to 18 inches wide
What you get:
- A strong Industrial Grade 36″ long Velcro strip with integral locking clip.
- An adapter of 36 x 2 x 0.9 inches.
2. Safety Innovations no hole stairway Kit
Similar is the Safety Innovations no hole stairway Kit that can also be used for both top square posts and round posts. The kit will fit posts measuring 2 3/4″ wide to 3 5/8″ inches wide, as you can see below.
What you get:
- A wood strip of 1 by 36″
- 2 Square clams with 2 Wood Inserts
- 1 Set round adapters
- Hardware to attach the wood rail to the clamps
- Installation instructions.
Smart Tip
Ensure that the distance between the bottom of the gate and the floor is no more than 22 inches. This is to prevent the toddler from wiggling through or getting his head trapped in the opening.
Install a gate on an angle
Sometimes it is needed toinstall a baby gate on an angle. In this case, you will have to choose a hardware-mounted baby gate. Check out the Cardinal Gates Stairway Angle Baby Gate that will mount at angles up to 30 degrees, allowing a stud's location when mounting on drywall.
How to install baby gates on a wrought iron railing or spindle?
If you were wondering how to install a baby gate on metal banisters that have thin metal balusters, then you may find that Y-spindle rods work like a charm. The Y-spindles work just like a regular pressure-mounted baby gate. All you have to do tighten them until they press hard against your banister or baluster, and your baby gate will lock into place.
The Y Spindle makes it possible to install a pressure-mounted gate on a round stairway baluster. Make sure you get two because you will need one for the top and one for the bottom. Please note, they are not suitable for hardware-mounted gates.
How to install baby gates to a hollow or drywall?
When you have a wooden door frame, the job is simple. Things become more complicated when you have to mount the gate to the drywall. Then it would help if you first located the wood framing behind it. Before you start drilling, I suggest you use this handy tool to help you locate where the studs are. This will stop you from making many unnecessary holes or drilling accidentally in metal parts and electric lines.
Smart Tip
Before you install the wall mounting kit make sure the placement of the screws will not interfere with the gate mounting hardware.
In case your wall has a baseboard, you may need a mounting kit with wood spacers for various molding styles. Wood spacers are used at the top to make up for the thickness of the baseboard. When installing a gate between one wall and a banister, one kit will do. But when you install it between two walls, you will need to purchase two sets, one for each wall.
Keep walls damage-free with wall protector cups
When installing a pressure-mounted baby gate, you will definitely need a set of wall cup protectors. They prevent the gate from leaving marking behind on the wall after they are removed. Their large surface area of soft rubber-like backing helps to distribute the pressure on the wall. Most of the time, they will also make the gate more sturdy.
Why we like Vmaisi Wall Protection Cups:
- Works on walls and banisters
- Comes in three colors (black, brown, and white)
- Very simple to install
- Can be used with most baby gate brands
In a nutshell, 5 tips on how to install a baby gate
- To start with, take your time toread the instructions of the manufacturer carefully. Check the tools you need to install the gate, like a screwdriver, a hand drill, screws (make sure they are long enough), and a pencil.
- Second, you will need a gate installation kit if you try to install baby gates on a banister, iron railing, or hollow wall that is not strong enough to hold the gate. For a wide variety of installations, kits see our examples on this page.
- No one likes to drill holes and put screws in their wooden banister. With spindles, velcro adapters, and clamps, this can be avoided. They can be used with round or square posts in any combination to ensure the proper and secure mounting of your gate.
- After installing the gate, try the firmness of the gate. Make sure it can hold the pressure that a child may place on it. Your gate is of no use if it is not installed correctly.
- Finally, check locks or latches if they function correctly. Make a good habit of keeping the gate locked at all times, even if your child is asleep.
Conclusion
Children are extremely inventive when it comes to conquering the challenge of a baby safety gate. Gates should be removed when your child can climb over the gate, or the height of the gate is below the child's shoulder level.
If installing a safety gate is causing you a headache, then why not use a baby gate assembly and installation service. A professional will have all the necessary equipment and experience to install your baby gate fast, secure, and according to the manufacturer's guidelines.
How to Install a Baby Gate on an Angle
Source: https://www.smartmumsclub.com/how-to-install-baby-gates/
0 Response to "How to Install a Baby Gate on an Angle"
Enviar um comentário